Avenger - Valkyrie Discussion Forum

vwcarnut · Joined: 13 Nov 2007 Posts: 19 Location: N.Va

What kind of things are still available for these cars? (both Avenger & Valkyrie) ? Might be interesting to post some form of Vendor list for us FNGs so we know where to get some of this stuff! Cool

FactoryMan · Posted: Wed Mar 05, 2008 7:17 AM Post subject: Options

If you go to ...
http://www.fiberfab.us/options.html
you can see what is available,
and I have many more things like gaskets and such!
DAN
_________________
" With Great Power, Comes Great Responsibility! "

vwcarnut · Joined: 13 Nov 2007 Posts: 19 Location: N.Va

Cool & Thanks Factoryman.See a couple of things I will end up purchasing when I get it on a pan,however I was wondering if any reproduction stuff was made, such as the pan mounts for the avenger to beetle pan, window regulator kits etc.....

FactoryMan · Posted: Thu Mar 06, 2008 5:25 PM Post subject: Reproduction Items

The problem involved is that we really do not make Avengers....
We make Valkyries, and supporting the VW platform isn't our thing...
We do have roll-over parts that fit both cars, but we do not stock VW stuff.
We might start suppporting the VW platform due to our new partnership
with Z.Kozma - who builds several VW platformed cars....
Jaguar SS100
Porsche RSK
Lotus Super 7
I'll keep everyone updated,
DAN
_________________
" With Great Power, Comes Great Responsibility! "

Korupt · Posted: Sun Mar 23, 2008 8:08 AM Post subject:

any chance of body repair sections becoming available any time soon?

closer inspection of my old heap shows that I could save a ton of work if I could simply replace a few sections rather than try to repair them.

FactoryMan · Posted: Tue Mar 25, 2008 1:18 PM Post subject: Sections

What sections do you need........
and how many different sections are you considering?
I have been making repair parts ever since I restarted the Biz...
I can make anything you need.... But you have to send me pictures,
or be very descriptive on the part required...{@j@}
DAN
_________________
" With Great Power, Comes Great Responsibility! "

Korupt · Posted: Wed Mar 26, 2008 2:04 AM Post subject:

I'm not sure how many sections I'll be needing yet, the bodyshell is due to be delivered to me some time towards the end of may, then I can finally get started on it, mostly around the front wheel arches and some parts of the doors need work, now that I know you make replacement sections I can sleep easier, I will be in touch.

Sidekick · Joined: 22 Feb 2007 Posts: 83 Location: michigan

What would the rear clip cost. I have a 2 piece avenger that I bought that was cut up. I intend to widen it 12 inches and have the same rear lines. This is going on a ladder frame with a 3.8 liter LeSabre midships.
_________________
Friends, memories, family- are the true measure of wealth.

Sidekick · Joined: 22 Feb 2007 Posts: 83 Location: michigan

Have you solved the roll up window problems or are we still stuck with the mustang vent wing and Galaxy glass?
_________________
Friends, memories, family- are the true measure of wealth.

FactoryMan · Posted: Sun Mar 01, 2009 9:00 AM Post subject: Parts and Pieces...

Sidekick,
Do you need the whole rerar section, or just the center part of the rear half?

I haven't finished the window thing yet although I do have a prototype done,
I need to make it into a production model for replication....

You can call or email me directly if you'd like
and we can talk about what exactly you need for your widening project!
DAN
Fiberfab US
1.541.536.0550 office
1.541.633.5807 cell
daniel.richer@fiberfab.us
_________________
" With Great Power, Comes Great Responsibility! "